 Best Sellers  Recently Viewed |  | Home    Allen Deluxe 3-Bike Hitch Mount Rack (1.25 or 2-Inch Receiver) | |
|  | |  | | | Allen Deluxe 3-Bike Hitch Mount Rack (1.25 or 2-Inch Receiver) | | | | | | | |
List Price:
| $149.99 | |
Our Price:
| $69.97 | |
You Save:
| $80.02 (53%)
| | Shipping: | This item ships for FREE with Super Saver Shipping. | |
*Shipping:
| |
| | | SKU:
CARR1033 | | In Stock | | Availability:
Usually ships in 1 business days | | |
|
| | Features | 3-bike rack fits vehicles with either a 1.25 or 2-inch trailer hitch16-inch long carry arms individually secure bicycles with Allen's patented tie-down systemFolding carry arms quickly drop out of the way when rack is not in useRack sets up and installs in less than 5 minutesSturdy steel construction with black powder coat finish; Lifetime warranty
|  |
| | Description | Deluxe 3 bike carrier for 1 1/4" or 2" hitch |  |
| | Product Details | | Product Length: | 16.6 inches | | Product Width: | 4.0 inches | | Product Height: | 25.9 inches | | Product Weight: | 22.65 pounds | | Package Length: | 24.5 inches | | Package Width: | 16.6 inches | | Package Height: | 4.0 inches | | Package Weight: | 23.45 pounds | | Average Customer Rating: | based on 156 reviews |
|  |
| | Customer Reviews | Average Customer Review: ( 156 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
327 of 330 found the following review helpful:
If you have a 1-1/4" receiver you'll want to read this review Apr 28, 2010
By Monomer I love this bike rack. The price is very reasonable and its build-quality I consider top-notch with all holes and welds being quite precise. The design has clever features that were new to me, such as being able to fold down the bike support arm when not in use so one doesn't accidentally run into it and also the ability to fold down the whole rack allowing quick and easy access through the rear door. The strap cinching system seemed cheap and goofy at first but after using it a few times I've now become quite adept at strapping and unstrapping the bikes to where it only takes a few seconds for me to do so. I now feel its quite clever in that this strapping system will accommodate any size bike tube (unlike some other bike racks I've had in the past). Its important to note that the spacing between the supports is quite wide at 14" and that might limit its use for smaller bikes, as our adult bikes just barely fit (with <2" to spare). I did run into an issue that I've noted that some other Amazon reviewers (reviewing other similar model Allen bike racks) had alluded to. All hitch mounted bike racks will wobble to some extent and that's why most have some sort of anti-wobble system that basically draws the bike rack tight to one side of the receiver to prevent it wobbling. Well, the anti-wobble bolt that is supplied with the bike rack works well for a 2" receiver hitch, however if you have a 1-1/4" receiver it won't fit unless you drill out the hole on one side of your receiver... it will need to be slightly larger than 1/2". If you don't want to do that then you'll need to buy an 'after-market' anti-wobble bolt. That's when I ran into the problem that anti-wobble bolts don't seem to exist for 1-1/4" receivers... oh, there are a huge variety of choices for 2" receivers but not the 1-1/4"... I don't know why. There are brand specific anti-rattle pins for 1-1/4" but none of them will work with these Allen bike racks. Finally, after much searching, I finally found one (the only one on the internet I've got to believe), however it was also a locking pin, which was okay with me. I got it from a site called [ etrailer ]... do this search on [ Anti-Rattle with Lock for 1-1/4" Trailer Hitches ] It's code#63147 and basically costs $25 and with shipping totals out at a hefty $30 but was well worth it for me. It works perfectly and is very high quality. I've read reviews here on Amazon by others with 1-1/4" receivers who couldn't seem to find a 1-1/4" locking pin (evidently even Allen's own won't work!!!)... well this one is both an anti-wobble as well as a locking pin and works on Allen bike racks. So I hope this bit of info helps those with 1-1/4" receivers like myself. And if I've managed to help you please check the YES under helpful checkbox below.
Okay I've got to add this edit... I just got through another search of that website 'etrailer' and did find Curt makes an anti-rattle pin (no lock) for a 1-1/4" receiver code#F-315 that appears will work with the Allen bike rack, its $11 less than the locking style. As far as I could find, after extensive web searching, these are the only two anti-rattle (anti-wobble) 1-1/4" hitch receiver pins I could locate anywhere that will work with Allen bike racks. So if anyone who reads this knows of another please add it in a comment as I believe others might find it helpful to have choices.
Final edit due to the many helpful comments attached to this review... Allen is definitely supplying both pin sizes with these bike racks now so no additional pins are required, however I still stand by my review in that this is a quality and cleverly thought-out bike rack system and represents an excellent price/value bargain.
41 of 42 found the following review helpful:
Inexpensive, but cheap Aug 19, 2010
By Josh This is the least expensive hitch mounted rack I could find anywhere.
The item arrived whole and the instructions are very clearly written, but not well illustrated.
Assembly was fast, but in putting the two larger parts together, I found it easy to tighten the bolts too much, thereby chipping the paint. The metal gave slightly, and the paint around the bolts came right off, but the pieces are definitely securely fastened.
The two included cotter pins are good, but the fasteners on the ends are a little flimsy.
Attaching to the hitch is straightforward. There's a two piece sleeve that goes over the 1.25" pipe to make it a proper 2" male end. Attaching the 'no wobble' bolt required two wrenches and upon tightening it to the maximum I was unpleasantly surprised that there was so much vertical movement of the rack in the hitch. It definitely does not wobble side to side, and the torsion is minimal to non-existent, but it is a little alarming that the rack travels up and down almost 1 to 1.5 inches, pivoting on the 'no-wobble' bolt.
The bikes went on quickly and easily and I was surprised that fully loaded, that they needed no more than the included straps to affix to the rack with no movement.
In taking the assembled and loaded contraption for a test ride I was disappointed and upset that a bumpy road definitely made the whole thing shake. I'm using shims on the top of the receiver to keep it all from bouncing too much, but I really felt I got exactly what I paid for - the cheapest 3 bike rack out there.
----
Warning - Amazon tags a Master brand locking hitch pin (with a blue anodized end) to sell with this item THAT DOES NOT FIT this rack.
41 of 42 found the following review helpful:
Great bike rack, a little high on the price. Apr 03, 2010
By B. Kreinbrink Great bike rack all around. Easy to assemble, just make sure you have the tools to do so. The locking washers are a pain without the proper wrenches. The "anti-wobble" bolt to make sure the rack doesn't sway from side to side is a little difficult to install, and it took me a few tries to get it right, but now it is rock solid and won't move anywhere. The fold down mechanism works like a charm, you just have to make sure you don't tighten the two bolts at the top too much or it will be really difficult to move.
Positives: + Easy to assemble + Very sturdy + Holds the bikes very well
Negatives: - Wal-Mart has the same rack for $23 cheaper at the time of this review (which I found out AFTER the fact, come on Amazon!) Edit: 11/19/2010 - Wal-Mart has since removed the 3-bike version of this rack on their website. - Instructions could be a bit more clear, but they have a great instructional video on the company website.
32 of 32 found the following review helpful:
Great bike rack Jul 11, 2009
By Steve Works as advertised! We took a 300 mile trip to the beach with this rack and our two bikes were rock solid as we went down the road. Easy installation, folds down easily, and nice tilt feature for trunk access.
14 of 14 found the following review helpful:
Great Value for the Price Jan 14, 2011
By Christopher G. Smith Purchased this bike hitch on a budget, it hit the mark and did what I intended it to do. After driving 2000 miles however, the clasp broke holding the bike. Glad I noticed it early and was able to reseat my road bike on a separate set of clasps. I contacted Allen and informed them of the failure. They shipped me out a replacement clasp, no questions asked and free of charge. So, mediocre build quality, but not entirely unexpected at this price point. Good customer service to resolve.
See all 156 customer reviews on Amazon.com
|  |
| |
| |  | |  |
|
 You may also like ... start hide footer |